Fiberglass Paper for HEPA Filter

It is comprised primarily of glass fiber produced by a wet laid process which is similar to that used in the production of paper.

category：

Main Product

Air Filter

Inquiry

Description

　　Fiberglass Filter Paper

　　It is comprised primarily of glass fiber produced by a wet laid process which is similar to that used in the production of paper. Our offerings rang from various ASHRAE grades (F6-F9), HEPA grades (H10-H14) to ULPA grades (U15-U16) with exceptional dust holding performance and provide with the highest available efficiency at a minimal resistance to air flow. It’s available in a laminated form to meet special air filtration requirements.

　　Applications: Compressor Inlet Filtration, Equipment Intake/Exhaust Air, Gas Turbine Air Intake, High-Temperature Industrial, HVAC System, Paint Spray Booth, Pre-Filtration for HEPA Systems, etc.

Classification	Grade	Efficiency (%)	Resistance (Pa)	Tensile Strength	Thickness (±0.02mm)	Basic Weight (±4g/㎡)	Stiffness (≥mg)
				MD (KN/m)
ULPA	U16	≥99.9999	≤580	1.0-1.25	0.34	75	950
	U15	≥99.999	≤480	1.0-1.25	0.34	75	950
HEPA 0.3 mm @5.3cm/s	H14	≥99.995	≤420	1.0-1.25	0.33	74	950
	H13	≥99.97	≤330	0.9-1.20	0.33	74	900
	H12	≥99.8	≤260	0.9-1.20	0.33	74	900
	H11	≥98	≤180	0.9-1.20	0.33	74	900
	H10	≥94	≤120	0.9-1.20	0.33	74	900
ASHRAE 0.4 mm @5.3cm/s	F9	≥95	≤80	0.9-1.15	0.33	70	850
	F8	≥90	≤60	0.9-1.15	0.33	70	850
	F7	≥80	≤40	0.9-1.15	0.33	70	850
	F6	≥60	≤25	0.9-1.15	0.33	70	850